Description |
Manufacturer: | Schneider Electric SA |
Manufacturer Part Number: | SUA500PDRI-S |
Manufacturer Website Address: | http://www.schneider-electric.com.au |
Brand Name: | APC by Schneider Electric |
Product Name: | DIN Rail - Panel Mount UPS with Standard Battery 500VA 230V |
Product Type: | Line-interactive UPS |
Technical Information |
Plug/Connector Type: | Hard Wire 3 wire (1PH+N+G) |
Receptacle Type: | Hard Wire 3-wire (H N + G) |
Receptacle Detail: | 1 x Hard Wire 3-wire (H N + G) |
Emergency Power OFF: | Yes |
Power Description |
Load Capacity: | 500 VA/325 W |
Input Voltage: | 240 V AC |
Output Voltage: | 240 V AC |
Surge Energy Rating: | 540 J |
Management |
Alarm: | - Low Battery
- On Battery
- Overload
|
Battery Management: | Intelligent Battery Management |
Controls/Indicators |
Status Indicators: | LED Status Display with Load and Battery Bar-Graphs and On Line : On Battery : Replace Battery : and Overload Indicators |
Interfaces/Ports |
Serial Port: | Yes |
Total Number of Expansion Slots: | 1 |
Battery Information |
Number of Batteries: | 1 |
Battery Characteristics: | Spill-proof, Maintenance-free |
Battery Chemistry: | Lead Acid |
Backup/Run Time (Full Load): | 8 Minute |
Backup/Run Time (Half Load): | 24 Minute |
Typical Battery Recharge Time: | 2.50 Hour |
Hot Swappable: | Yes |
Environmental Conditions |
Maximum Operating Temperature: | 40°C |
Sound Emission (A-Weighted): | 55 dB(A) |
Thermal Dissipation: | 90 BTU/h |
Physical Characteristics |
Height: | 148 mm |
Width: | 362 mm |
Depth: | 171 mm |
Form Factor: | DIN Rail |
Weight (Approximate): | 12.86 kg |
Miscellaneous |
Package Contents: | - DIN Rail - Panel Mount UPS with Standard Battery 500VA 230V
- CD with Software
- Documentation CD
- Installation Guide
- Smart UPS Signalling RS-232 Cable
- Wall-mounting Template
|
Certifications & Standards: | |
Environmentally Friendly: | Yes |
Environmental Certification: | |
Warranty |
Limited Warranty: | 2 Year |